LED Lighting
The most comprehensive use of LED lighting on any Acura vehicle is a signature design element of the new TLX. From the dramatic Jewel Eye™ headlights to the convenient new puddle lights and back to the new taillights, the LED lighting provides crisp, bright, energy-efficient and long-lasting illumination that directly improves the driving and ownership experience. A summary of exterior lighting includes:
Forward Lighting
New LED headlights with incandescent-bulb turn signals
New LED parking and side marker lights
New LED under-mirror puddle lights (Advance grades)
LED front fog lights (Advance grades)
Rear Lighting
New LED tail and trunk-lid lights with incandescent-bulb turn signals and backup lights
New LED Center High Mount Stop Lights (CHMSL) with integrated cover
LED license-plate lights
Jewel Eye™ LED Headlights
Acura's signature Jewel Eye™ LED headlights give the TLX with an advanced and appearance while producing superior down-the-road illumination. The headlights utilize an array of high-intensity LED lamps to deliver outstanding light distribution, distant irradiation performance and light characteristics with a wavelength close to the human eye's luminosity curve. With five "Jewel Eye" lights per headlight, the LED lights provide improved down the road visibility compared to HID and halogen headlights.
On each side of the TLX, the low beams consist of three LED lights, while the innermost LED lights are utilized for high beams. The daytime running light (DRL) function utilizes all five lenses illuminated by LED's that are clearly and dramatically visible even in bright sunlight. Altogether, they create a dramatic and distinctive appearance with superior lighting capability.
Besides producing better light characteristics with lower energy usage, the TLX's LED headlights are longer lasting. With an estimated life expectancy of 10,000 hours, the LED headlights are projected to last five times longer than HID headlights and 10 times longer than traditional halogen headlight bulbs — contributing to less frequent replacement and potential associated cost savings. Further, their compact packaging allow for an improved aerodynamic frontal design.
LED Fog Lights
Included in the Advance Package, LED fog lights are positioned at the lower corners of the TLX's front fascia for maximum effectiveness and a bold appearance.
LED Taillights
LED taillights are part of the TLX's comprehensive exterior lighting array. Highly stylized to compliment the TLX body design, they are also brighter than traditional incandescent-bulb taillights, with a longer projected lifespan. Use of LEDs allows the addition of a "light pipe" styling element extending across the top of the lenses, contributing to the TLX's unique blend of design and engineering.
LED Puddle Lights
Included in the standard Smart Entry system, LED puddle lights positioned on the undersides of both side mirror housings enhance convenience when entering or leaving the vehicle. The LEDs automatically illuminate when the TLX detects the key fob approaching, in concert with the automatic interior illumination. The puddle lights also illuminate when the driver puts the TLX in Park and leaves the vehicle, fading off after about two seconds after locking the doors, or 30 seconds if the doors are not locked.
LED Side Mirror Lights
Keying off of the Jewel Eye™ LED headlights, each TLX mirror has LED lights fused into the mirror housing. The LEDs come to life when the turn indictors are activated, providing extra visibility and a high tech appearance.
Auto-Dimming Side Mirrors
Included in the Advance Package, auto-dimming side mirrors use the same activation sensor as the TLX's auto-dimming inside rearview mirror. The auto-dimming function of all three mirrors helps reduce glare during nighttime driving, especially from the headlights of following vehicles. Mirror glass area is 24-percent greater than on the previous TL model for improved rear visibility.
Expanded View Driver's Mirror
An Expanded View Driver's Mirror performs like two mirrors in one. The larger, inset portion of the mirror is relatively flat and works like a conventional sideview mirror to show objects to the side of the vehicle. The outer portion of the mirror is optically convex and functions as a wide-angle mirror to expand the driver's view to the side by approximately 39 percent, helping to reduce the blind-zone area.
Acoustic Glass
To reduce noise in the cabin The TLX utilizes a 4.5-mm thick, 3-layer acoustic windshield that consists of two layers of safety glass, separated by a thin acoustic resin center. The windshield reduces wind noise on in the higher frequency ranges, contributing to a luxurious feeling of isolation in the cabin. Also helping to mitigate wind, road and traffic noise in the cabin is 5.0-mm thick front door glass.
Powertrain
-------------------------------------------------------------
The TLX's two new Direct Injection (DI) engines combine power and efficiency. The 2.4-liter DOHC i-VTEC 4-cylinder engine produces a peak 208 horsepower and 247Нм of torque. It has more horsepower and substantially more torque—particularly in the mid-range—than the same-sized engine that powers the TSX sedan. Even though the TLX is larger and heavier than the outgoing TSX 4-cylinder, it actually posts superior EPA fuel-economy ratings .
A new 3.5-liter direct injected i-VTEC® 24-valve V-6 engine replaces the 3.5-liter and 3.7-liter engines in the TL. The new powerplant gains 10 horsepower (290 peak horsepower) and 355 or torque. To boost fuel efficiency, Variable Cylinder Management (VCM) automatically deactivates three of the engine's six cylinders under light engine loads. TLX SH-AWD models also add a new automatic idle-stop feature to further improve fuel efficiency.
Powertrains at Glance
2.4-liter DOHC i-VTEC
2.4-liter, DOHC, inline-four engine produces peak output of 208 horsepower at 6,800 rpm and peak torque of 247Hm at 4,500 rpm
i-VTEC® (intelligent Variable Valve Timing Control and Lift Electronic Control) for intake valves
Computer-controlled Direct Injection (DI) with multi-hole fuel injectors
11.6:1 compression ratio
High-strength steel crankshaft
Drive-by-Wire™ throttle system
Direct ignition system
Chain drive, DOHC, i-VTEC® 16-valve
Detonation/knock control system
Integrated Dynamics System (IDS) provides three unique drive-by-wire throttle profiles
Maintenance Minder™ system optimizes service intervals
100,000 +/- miles tune-up interval3
High-flow, close-coupled next-generation precious metal catalytic converter plus under floor catalytic converter
ULEV-2 Emissions compliant
24/35/281 (city/highway/combined) mpg EPA fuel-economy ratings (FWD)
Sequential SportShift 8-Speed Dual-Clutch Transmission (DCT) with Torque Converter and Paddle Shifters
World's first DCT to be equipped with a torque converter
Straight-gate style console-mounted shifter
Sequential SportShift allows semi-manual operation
Steering wheel-mounted, racing-inspired paddle shifters
Cooperative control between Drive-by-Wire throttle system and transmission makes for quicker, smoother shifts
Advanced shift-hold control limits up shifts during spirited driving
Grade Logic Control System reduces gear "hunting" on steep hills
3.5-liter SOHC i-VTEC V-6 with VCM
3.5-liter, SOHC, V-6 engine produces peak output of 290 horsepower at 6,200 rpm and peak torque of 355Hm at 4,500 rpm
i-VTEC® (intelligent Variable Valve Timing and Lift Electronic Control) for intake valves with Variable Cylinder Management™ (VCM®)
Computer-controlled Direct Injection (DI) with multi-hole fuel injectors
11.5:1 compression ratio
High-strength steel crankshaft
Crossflow magnesium intake manifold
Belt drive, SOHC, i-VTEC® 24-valve with VCM®
Drive-by-Wire™ throttle system
Direct ignition system
Detonation/knock control system
Integrated Dynamics System (IDS) provides three unique drive-by-wire profiles
Maintenance Minder™ system optimizes service intervals
100,000 +/- miles tune-up interval3
High-flow, close-coupled next-generation precious metal catalytic converters plus under floor catalytic converter
ULEV-2 Emissions compliant
Sequential SportShift 9-Speed Automatic with Paddle Shifters
Electronic shift-by-wire gear selector
Sequential SportShift automatic transmission allows semi-manual operation
Steering wheel mounted racing-inspired paddle shifters
Cooperative control between Drive-by-Wire throttle system and transmission makes for quicker, smoother shifts
Advanced shift-hold control limits up shifts during spirited driving
Grade Logic Control System reduces gear "hunting" on various road gradients
Continuously adaptive Sport+ setting which selects shift strategies suited for aggressive driving conditions
Direct-Injected 2.4-liter Inline 4-cylinder Engine
The TLX's new Direct Injection (DI) 2.4-liter DOHC i-VTEC 4-cylinder engine brings a host of intelligent technology to its segment. The engine's i-VTEC system combines VTC (Variable Timing Control), which continuously adjusts the intake camshaft phase, with Variable Valve Timing and Lift Electronic Control (VTEC), which changes valve lift, timing and duration of the intake valves. A new Direct Injection (DI) system, dual-stage intake manifold and other technologies combine to produce up to 10-percent more torque as compared to the same sized engine that is standard in the TSX Sedan, with greater power available over the entire operating range. Peak power (206 horsepower) is also higher than that of the TSX engine, with the peak arriving at 6,800 rpm instead of 7,000 rpm.
4-Cylinder Engine Block, Crankshaft and Pistons
The TLX's 2.4-liter engine has a lightweight die-cast aluminum block with a single main-bearing cradle design that creates a rigid assembly to help minimize noise and vibration. Cast-in iron cylinder liners provide long-lasting durability. Each journal on the forged-steel crankshaft is micropolished to reduce internal friction. To improve smoothness throughout the rpm range and help lower noise levels, the engine is fitted with an internal balancer unit. Consisting of a pair of chain-driven counter-rotating shafts located in the lower block and integrated into the oil pan, the balancing system helps quell the inherent second-order harmonic vibrations that normally impact inline 4-cylinder engines.
To reduce piston-sliding friction, the cylinder bores are offset by 8.0 mm from the crankshaft. This gives the connecting rods a more favorable angle during each power stroke, which reduces side loading on the pistons and in turn, improves efficiency. The engine features a forged crankshaft for high rigidity and low friction. Lightweight pistons have a carefully optimized skirt design to minimize reciprocating weight, and reduced weight minimizes vibration and increases operating efficiency. The piston crowns are dished, to help maintain stable combustion and to optimize distribution of the stratified fuel charge from the direct injector in each cylinder. This close control over the combustion process boosts overall operating efficiency.
4-Cylinder Dual-Stage Intake Manifold
To maximize power output, the 2.4-liter engine has a dual-stage intake manifold has two different intake runner lengths that are selected based on the operating conditions. An actuator and a set of four butterfly valves control the intake runner switching process. At low engine speeds, the long runners are used to improve low-end torque. At higher engine speeds the system switches to the short intake runners for greater high rpm power. The result is intake tuning that is optimized for the engine's entire operating range.
2.4-liter Engine Cylinder Head and Valvetrain
The lightweight cylinder head is made of pressure-cast aluminum alloy, with exhaust passages cast directly into the cylinder head. This eliminates the need for a traditional separate exhaust manifold and allows the close-coupled catalytic converter to be mounted directly to the cylinder head.
A silent-chain drives the dual overhead cams and features a double-arm tensioner design that reduces operating friction. The cam drive is designed to be maintenance free throughout the life of the engine.
To help boost fuel efficiency and power, the combustion chamber shape and valve angles have been optimized. The included valve angle is a narrow 35 degrees, which decreases the surface-to-volume ratio and helps create a flatter, more compact combustion chamber that reduces unburned hydrocarbon emissions. With this combustion chamber shape and the precise control of direct injection, the compression ratio set at 11.6:1.
The cylinder head features a new "tumble port" intake design. In combination with the new combustion chamber and piston crown shape, the design's high level of airflow tumble helps create a homogenous fuel mixture for low fuel consumption and high airflow for high power output.
2.4-Liter Engine i-VTEC Valve Control System
The TLX's direct-injected 2.4-liter DOHC 16-valve i-VTEC engine uses an advanced valve-control system to combine high power output with high fuel efficiency and low emissions. The system combines VTC (Variable Timing Control), which continuously adjusts the intake camshaft phase, with Variable Valve Timing and Lift Electronic Control (VTEC), which changes valve lift, timing and duration of the intake valves.
At low rpm, the VTEC intake valve timing and lift are optimized for high torque and low fuel consumption. As engine rpm builds past 4,900 rpm, the VTEC system transitions to a high-lift, long-duration intake cam profile for superior high-rpm engine power.
The "intelligent" portion of the system is its ability to continuously vary the timing of the intake cam relative to that of the exhaust camshaft. This helps boost power and also provides a smoother idle (allowing idle speed to be reduced). The intake cam timing is varied based on input from sensors that monitor rpm, timing, throttle opening, cam position and exhaust air-fuel ratio. The result is increased fuel efficiency and lower NOx emissions.
3.5-liter V-6 Engine
The TLX 3.5-liter i-VTEC® V-6 is closely related to the 3.5-liter V-6 that powers the RLX and MDX. It has a die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners, a smooth-firing 60-degree V-angle, and compact overall dimensions. As in the 2014 Acura RLX and MDX, the TLX powerplant combines Direct Injection with i-VTEC and Variable Cylinder Management (VCM) to give the TLX impressive fuel economy ratings and overall performance. This clean-running engine meets ULEV-2 emissions standards in select states, and Federal Tier 2, Bin 5 standards.
A wide range of improvements, including revised intake and exhaust ports and new valve timing, help make the 3.5-liter V-6 more powerful than the 3.5-liter V-6 engine it replaces. The aluminum-alloy 24-valve engine produces 290 horsepower at 6,200 rpm and generates 355Hm of torque at 4,500 rpm. Torque has also improved throughout the entire operating range, with the most substantial gains at low rpm, aiding the TLX's responsiveness.
V-6 Engine Block and Crankshaft
With its 60-degree V-angle, the TLX's available V-6 engine has compact overall dimensions that allow efficient packaging within the vehicle. The V-6 has a die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The 3.5-liter V-6 uses a high-strength steel crankshaft for minimum weight. A cooling control spacer positioned in the water jacket surrounding the cylinders helps control warm-up and operating cylinder liner temperatures to reduce friction.
V-6 Pistons/Connecting Rods
Designed with "cavity-shaped" crowns, the V-6 engine's pistons help maintain stable combustion and contribute to optimized combustion. Ion-plated piston rings help reduce friction for greater operating efficiency. The compression ratio (relative to the 2014 TL 3.5- and 3.7-liter engines) has risen from 11.2:1 to 11.5:1. Heavy-duty steel connecting rods are forged in one piece and then the connecting rods are "crack separated" to create a lighter and stronger rod with an optimally fitted bearing cap.
V-6 Cylinder Heads and Valvetrain
Like other Acura V-6 powerplants, the TLX engine's 4-valve cylinder heads are a single-overhead-camshaft design, with the cams driven by the crankshaft via an automatically tensioned toothed belt. Made of low-pressure cast, low-porosity aluminum, each cylinder head incorporates a laminar flow intake design that improves combustion efficiency by creating a more homogeneous fuel-air mixture. An integrated exhaust manifold cast into each cylinder head reduces parts count, saves weight, improves flow and optimizes the location of the close-coupled catalyst.
V-6 i-VTEC with 2-Stage Variable Cylinder Management™ (VCM®)
The TLX SOHC V-6 combines Variable Cylinder Management (VCM) with Variable Valve Timing and Lift Electronic Control (i-VTEC), which changes the lift profile and thus timing and lift duration of the intake valves. A switching mechanism allows the engine to operate with the lift and duration optimized for either low or high-rpm operation. The rear cylinder bank closes all intake and exhaust valves to minimize pumping losses on the cylinders which are still firing, increasing overall engine efficiency.
The "intelligent" portion of the system is its ability to vary valve operation based on the driving situation and engine rpm. At low rpm, the i-VTEC intake valve timing and lift are optimized (low lift, short duration) for increased torque, which allows a wide range of 3-cylinder operation. As engine rpm builds past 5,000 rpm, the i-VTEC system transitions to a high-lift, long-duration intake cam profile for superior high-rpm engine power.
V-6 VCM Operation — To help improve the fuel efficiency of the TLX engine, Acura's Variable Cylinder Management (VCM) is used. The system cooperates with Active Control engine Mounts (ACM) to allow the engine to operate with three cylinders in a wide range of situations to maximize fuel efficiency and reduce emissions. When greater power is needed, the system switches seamlessly to 6-cylinder operation.
During startup, aggressive acceleration, or steep ascents — any time high power output is required — the engine operates on all six cylinders. During moderate-speed cruising and at low or moderate engine loads, the system operates just the front bank of three cylinders.
The VCM system can tailor the working displacement of the engine to match the driving requirements from moment to moment. Since the system automatically closes both the intake and exhaust valves of the cylinders that are not used, pumping losses associated with intake and exhaust are eliminated and fuel efficiency gets a further boost. The system combines maximum performance and maximum fuel efficiency — two characteristics that don't typically coexist in conventional engines.
VCM deactivates specific cylinders by using the i-VTEC (intelligent Variable Valve-Timing and Lift Electronic Control) system to close the intake and exhaust valves while the Electronic Control Unit (ECU) simultaneously cuts fuel to those cylinders. The spark plugs continue to fire in inactive cylinders to minimize plug temperature loss and prevent fouling induced from incomplete combustion during cylinder re-activation.
The system is electronically controlled, and uses special integrated spool valves in the cylinder heads. Based on commands from the system's Electronic Control Unit, the spool valves selectively direct oil pressure to the rocker arms for specific cylinders. This oil pressure in turn drives synchronizing pistons that connect and disconnect the rocker arms.
The VCM system monitors throttle position, vehicle speed, engine speed, automatic-transmission gear selection and other factors to determine the correct cylinder activation scheme for the operating conditions. In addition, the system determines whether engine oil pressure is suitable for VCM switching and whether catalytic-converter temperature will remain in the proper range. To further smooth the activation or deactivation of cylinders, the system adjusts ignition timing and throttle position and turns the torque converter lock-up on and off to seamlessly transition between three and six cylinder modes.
V-6 SH-AWD Idle Stop System
To help improve fuel efficiency, TLX SH-AWD models come equipped with a new Idle Stop capability. When the system is active and certain operating conditions are met, the TLX engine will automatically shut off when the vehicle comes to a stop. When the driver releases the brake pedal after a stop, the engine automatically restarts and the TLX is ready to accelerate.
Часть4: www.drive2.ru/l/8983082/









Пожалуйста, войдите, чтобы пользоваться всеми функциями Drive2
Войти