Привет.
Установлен IPD Heavy Duty Turbo Control Valve (Клапан управления турбиной) взамен штатного. Девайс с автомобиля Александра RVolvo, спасибо ему за установку.


Инфа:
IPD's second generation TCV provides stable boost control at levels that exceed the capabilities of the stock unit. Slow spool time and fading boost pressure is common with weak factory solenoids and can rob you of power you didn't know you lost. Our testing has shown that the factory valve is incapable of maintainin cycles at pressures above 16-17 psi of boost. This means your TCV can cost you boost at wide open throttle. While most applications will not boost this high, it demonstrates the reason that failure is so frequent on the original equipment.
IPD's heavy duty TCV is designed to handle high heat, high pressure, and tough environments and was built to last! The second generation valve maintains stable repeatability at speeds and boost levels unequaled by any other controller on the market. This is direct fit unity and typically installs in under ten minutes with no modification s or tuning required.









Комменты 48
Тигран скажи пожалуйста с IPD клапаном дует 1.0-1.1 бар ?
Нет, он просто держит лучше, чем стоковый.
А вот как его перенастроить если он уже стоял на машине до этого?
Пожалуйста, войдите, чтобы пользоваться всеми функциями Drive2
Войти